Hi Rick
It gives me an excuse to make a milling machine.
Keith
Deep Run Portage
Back Shop
" The Lizard Works"
--- On Mon, 2/28/11, Rick Sparber <rgsparber@aol.com> wrote:
From: Rick Sparber <rgsparber@aol.com>
Subject: RE: [gingery_machines] new article available: A Different Kind of Screw Vise
To: gingery_machines@yahoogroups.com
Date: Monday, February 28, 2011, 9:07 AM
Keith,
With a small change in the design, you can do it all on the lathe. Just skip the end mill work. You will have to drop the screw in the hole rather than slide it in from the side but the rest is the same. This change is a good way to go when you get to screws smaller than 6-32 because it is hard to find end mills smaller than about 0.1" in diameter.
Rick
-----Original Message-----
From: gingery_machines@yahoogroups.com [mailto:gingery_machines@yahoogroups.com] On Behalf Of keith gutshall
Sent: Monday, February 28, 2011 8:01 AM
To: gingery_machines@yahoogroups.com
Subject: Re: [gingery_machines] new article available: A Different Kind of Screw Vise
Hi Rick
That looks like a good idea for holding small screws.
I guess I need tomake a Milling machine to make the parts.
Keith
Deep Run Portage
Back Shop
" The Lizard Works"
--- On Sun, 2/27/11, Rick Sparber <rgsparber@aol.com> wrote:
From: Rick Sparber <rgsparber@aol.com>
Subject: [gingery_machines] new article available: A Different Kind of Screw Vise
To: valleymetal@yahoogroups.com, gingery_machines@yahoogroups.com, atlas_craftsman@yahoogroups.com, mill_drill@yahoogroups.com
Date: Sunday, February 27, 2011, 12:22 PM
This article is another in my series of "newbie" projects although
experienced machinists may find value in the design.
The vise clamps a #6 or #8 screw such that it's end can be easily and safely
beveled on a grinding wheel. The vise is similar to a pin vise except that
it grabs the head and body.
If you are interested, please see
http://rick.sparber.org/dsv.pdf
Questions and comments are welcome. All of us are smarter than any one of
us.
Rick
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
[Non-text portions of this message have been removed]
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map
No comments:
Post a Comment