Rick
I looked at it one more time and the only thing that could make a difference in maybe cut both sides of the angle blocks so you can put a piece of scrap the same size on the bottom so your clamp won't twist.Anything beyond that I can not imagine. Now I have to make a pair. Thanks for the inspiration.
Nelson Collar
--- On Thu, 5/5/11, RG Sparber <rgsparber@aol.com> wrote:
From: RG Sparber <rgsparber@aol.com>
Subject: RE: [gingery_machines] new article: A 45 degree Jaw Set for a Horizontal/Vertical Bandsaw
To: gingery_machines@yahoogroups.com
Date: Thursday, May 5, 2011, 9:27 PM
Nelson and Malcolm,
Actually, I just welded up what Malcolm suggested. It does work but in order to get the movable jaw force squarely on the part, I had to go with a rather large piece of angle. The result is that I must open the jaws all the way in order to cut a piece of 2" bar. However, Malcolm's design does go on and come off faster than my prototype.
The "pain" really is in moving the fixed jaw. The movable jaw does pivot on its bolt. I also found that I didn't have to cut the movable jaw.
I'll add a few pictures to the article to show how the idea has evolved.
Rick
-----Original Message-----
From: gingery_machines@yahoogroups.com [mailto:gingery_machines@yahoogroups.com] On Behalf Of Nelson Collar
Sent: Thursday, May 05, 2011 2:17 PM
To: gingery_machines@yahoogroups.com
Subject: RE: [gingery_machines] new article: A 45 degree Jaw Set for a Horizontal/Vertical Bandsaw
Malcolm
Rick said quote "But it is such a pain to move these jaws. So
instead I quickly made up a pair of softjaws that hold the bar stock at 45
degrees." I think myself that Rick's solution is better than making any adjustments and I'll be a betting that Rick's can go from 90 degree to 45 degree and back to a 45 quicker than you can adjust you clamp. I one that if I do not need to move it why should I? And the speed of that soft-jaws add, Rick can put it on the shelf until the next time. Hats off to you Rick.
Nelson Collar
[Non-text portions of this message have been removed]
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map
No comments:
Post a Comment