Re: [gingery_machines] new article: Milling An Angle Bracket

 

Rick

Seems over complicated to me.
Drill hole on the waste side at the inside corner.  Saw to  length, saw down the inside on waste side to break into hole, mill to marked lines with allowance for a cleaning cut, measure and apply the finish cut.

Malcolm

I don't suffer from insanity I enjoy it!

--- On Mon, 5/30/11, RG Sparber <rgsparber@aol.com> wrote:

From: RG Sparber <rgsparber@aol.com>
Subject: [gingery_machines] new article: Milling An Angle Bracket
To: gingery_machines@yahoogroups.com, mill_drill@yahoogroups.com, valleymetal@yahoogroups.com
Date: Monday, May 30, 2011, 12:06 AM

 

This is another in my sequence of article for people new to our hobby. I

deal with the cutting of an angle bracket on a mill/drill. If you are

interested, please see

http://rick.sparber.org/mab.pdf

Your questions and comments are welcome. All of us are smarter than any one

of us.

Rick

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (2)

Recent Activity:

• New Members 8

Visit Your Group

<*> Member map - Who and where we are.  Please add yourself so members can find each other.
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

.

__,_._,___