[gingery_machines] Re: new article: Milling An Angle Bracket

 

That's a slick trick. I think I've heard it before, but wouldn't have remembered it.

CT2

--- In gingery_machines@yahoogroups.com, Rick Sparber <rgsparber@...> wrote:
>
> CT2,
>
> I have used the extra drill in the first hole trick a few times. But usually a tightened screw is the best solution.
>
> One trick on tapping that sometimes works is to chuck a #6 or #8 new spiral point tap into a good quality battery powered drill. Have a second drill handy with the proper tap drill. You can then go around to oddly positioned locations and install screws with ease. Second best is to use self tapping screws.
>
> Rick
> Rick.Sparber.org
>
> On Jun 1, 2011, at 10:00 PM, "Brite" <coldtoo2000@...> wrote:
>
> > Hi Rick,
> >
>>>>>>>>>>>>>>>>>>>>***CUT***>>>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (14)

Recent Activity:

• New Members 6
• New Photos 1

Visit Your Group

<*> Member map - Who and where we are.  Please add yourself so members can find each other.
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

.

__,_._,___