[gingery_machines] Re: Elliptical Chuck

 

Ron,

Programming a CNC can takes as long as a set up and if you have a power blink during the process its a no go! CNC is great for production but for one off can be a pitta!

Wonk

--- In gingery_machines@yahoogroups.com, Ron Thompson <ron@...> wrote:
>
> On 7/31/2011 12:43 AM, Rod wrote:
> >
> >
> > It's the tail wagging the dog. My need is for tapered elliptical
> > mandrels to form bezel and prong settings. After years of searching
> > and no joy, this is my latest attempt.
> > <http://www.youtube.com/watch?v=xAoM-CRZBNY>
> > Feel free to make comments, suggestions and improvements and by all
> > means make one for your shop.
> >
> > Rod
> >
> That seems like the long way around the block, to me. CNC can cut
> anything you can draw. A few stepper motors, drivers, and Mach3...
>
> --
>
>
> Ron Thompson
> On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
>
> There are two kinds of posts on newsgroups.
> 1. This is what I have done...
> 2. This is what I think...
> Be aware of the difference!
>
> http://www.ourcadguy.com/
>
> http://www.plansandprojects.com My hobby pages are here:
> http://www.plansandprojects.com/My%20Machines/
>
> Visit the castinghobby FAQ:
> http://castinghobbyfaq.bareboogerhost.com/
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (10)

Recent Activity:

• New Members 4
• New Photos 6

Visit Your Group

<*> Member map - Who and where we are.  Please add yourself so members can find each other.
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map

Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use

.

__,_._,___