Re: [gingery_machines] new article: How Accurate is Your Micrometer?

On 1/24/2011 10:31 PM, Rick Sparber wrote:
>
> Keith,
>
> Understand that I only bought one mic new. The rest were used. The new
> one I bought new was similar to this one which does not come with a
> standard:
>
> <
> http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=8915769&PMAKA=510-2202
> <http://www.use-enco.com/CGI/INSRIT?PARTPG=INLMKD&PMPXNO=8915769&PMAKA=510-2202>>
>
> Rick
>
Typically, Mic.s come with a standard to set the minimum they will
measure. Since 1" mic.s measure 0 at minimum, no standard is needed.
Even Harbor freight mic.s come with standards.

--

Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA

There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!

http://www.ourcadguy.com/

http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/

Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/

[Non-text portions of this message have been removed]

__._,_.___

Messages in this topic (24)

Recent Activity:

<*> Member map - Who and where we are. Please add yourself so members can find each other.
http://groups.yahoo.com/group/gingery_machines/app/peoplemap/view/map

MARKETPLACE